Split System Air Conditioning Installation in Newcastle
Why Newcastle Homeowners Choose Our Split Systems:
What is Split System Air Conditioning?
Split system air conditioning is the most popular choice for Newcastle homes because it requires no ductwork, is quick to install, and allows you to perfectly control the temperature in individual rooms. This makes it ideal for modern Australian households, apartments, and retrofitted properties where installing a full ducted system like a central HVAC system would be impractical or costly.
A split system air conditioner consists of two main parts:
1. A sleek indoor unit that mounts to your wall (delivering the cool or warm air) , commonly referred to as the evaporator unit in HVAC terminology
2. An outdoor compressor unit that does the heavy lifting, also known as the condenser unit, which houses the compressor and condenser coil.
The two are connected by piping and electrical cabling, hence the name “split.” These connections typically include refrigerant lines, insulation, and a condensate drain, all of which are essential components in refrigeration systems.
How It Works:
Unlike old, noisy window rattlers, a split system uses refrigerant to transfer heat. This process is based on the principles of thermodynamics and the refrigeration cycle, similar to technologies used in heat pumps and commercial cooling systems.
In Summer: It absorbs heat from inside your home and pumps it outside, leaving your room cool and dry. This cooling process also helps reduce indoor humidity levels, improving comfort and air quality, especially in coastal climates like Newcastle.
In Winter (Reverse Cycle): The cycle reverses, extracting heat from the outside air (even on cold days) and pumping it inside to warm your home. This reverse cycle technology makes split systems energy-efficient alternatives to electric heaters, often achieving higher COP (Coefficient of Performance) ratings compared to traditional heating methods.
Save Big
Government Rebates
Claim Up To $730 Cash Back
Did you know you could be eligible for significant savings on your new air conditioning installation?
Note: Offers change frequently. Contact us to find out exactly how much you can save right now.
Why Install a Split System in Your Home?
- Cost-Effective: Cheaper to install than ducted systems, making them perfect for cooling specific rooms or smaller homes. This affordability is due to minimal installation requirements and the absence of extensive ductwork, unlike central air conditioning systems or ducted HVAC setups, which significantly increase labor and material costs.
- Zone Control: You only pay to cool the room you are using. Why cool the whole house if you’re just watching TV in the lounge? This feature, often referred to as zoned air conditioning or room-by-room climate control, improves energy efficiency and reduces electricity consumption, especially when paired with inverter technology that adjusts power usage dynamically.
- Air Quality: Modern units come with filters that trap dust and allergens. We also offer air purification solutions that eliminate 99% of bacteria and viruses. These systems may include HEPA filters, activated carbon filters, and ionisers, contributing to improved indoor air quality (IAQ) and helping households manage asthma, allergies, and airborne pollutants.
- Coastal Durability: Living near the coast? We can provide units with anti-corrosion treatments or hot-dipped galvanising to extend the life of your outdoor unit against sea salt. This protection is particularly important in marine environments, where salt-laden air accelerates corrosion of condenser coils and metal components, making corrosion-resistant coatings and coastal-rated air conditioners essential for long-term performance.
Most installations take half a day. Here’s exactly what happens from the moment you contact us to the moment we pack up our tools.
Key Facts About Perry Air and Electrical
Premium Air Conditioning Services Near Me – Local Experts
Why Choose Us?
In an industry full of commission-hungry sales reps and “here today, gone tomorrow” operators, Perry Air and Electrical stands out for one reason:
We are a Dual-Trade, Owner-Operated business.
Here is exactly why Newcastle families and businesses trust us with their comfort:
5-Year Labour & Materials Warranty:
Most competitors only offer the standard 12 months. We back our workmanship for 5 years. If we install it, we stand by it.
We Are the Experts:
We don’t just install – we diagnose. We understand exactly how your system works. Our dual-qualification gives us the scope to do this.
No Outsourcing Headaches:
You deal with us. We don’t hand your job off to a random subcontractor you’ve never met. Where a one stop shop for your aircon needs.
We Help You Save Money:
We are experts in Government Rebates. We will help you navigate cash-back offers and rebates (up to $1,000) to ensure you get the best deal possible.
Schedule a free consultation with one of our specialists today.
- Sizing & Advice: We assess your room size (e.g., standard bedrooms vs. open-plan living) to recommend the perfect kW output, preventing energy wastage.
- Premium Brands: We supply and install trusted brands like Mitsubishi Electric Industries, Daikin, Panasonic, and Actron Air.
- Safety First: We install all necessary safety switches and circuit protection to Australian Standards.
- Neat & Tidy: We pride ourselves on leaving your home exactly as we found it – cool, clean, and comfortable.
- Leak Detection & Repair: Many customers ask for an “AC regas”. Note that air conditioners are sealed systems; if they need gas, they have a leak. We find the leak, repair it, and recharge the system with the correct refrigerant to ensure it lasts.
- Electrical Fault Finding: From blown capacitors to tripping safety switches, we have the electrical qualifications to fix internal wiring issues safely.
- Coastal Protection: We can treat outdoor units with protective sprays or advise on hot-dipped galvanised units to prevent rust in coastal suburbs.
- Health & Safety: Essential for asthma sufferers and families, our deep clean removes contaminants that can harm your lungs.
- Landlord Compliance: We recommend a Hydro Clean every 6 months for rental properties to meet compliance standards and ensure tenant safety.
- Odour Removal: Eliminates that musty smell often caused by bacterial buildup.
- Switchboard Upgrades: ensuring your board can handle the load of new AC units.
- Ceiling Fans: Combining fans with AC for ultimate efficiency.
- General Power: Installation of power points and safety switches.
Premium AC Brands We Partner With
We only install brands that we know can handle the Australian climate. We are authorised installers for the market leaders.
How Much Does a Split System Installation Cost?
- The size of the unit (e.g., 2.5kW for a bedroom vs. 7kW for a lounge). Correct system sizing, often determined through a heat load calculation or Manual J assessment, ensures optimal performance, energy efficiency, and longevity of the air conditioning unit.
- The brand you choose. Leading HVAC brands like Daikin, Mitsubishi Electric, Fujitsu, and Panasonic offer varying levels of energy efficiency, reliability, and warranty coverage, which can influence upfront and lifecycle costs.
- The complexity of the install (e.g., back-to-back installs are cheaper than those requiring long pipe runs or roof mounting). Additional factors such as electrical upgrades, switchboard capacity, compliance with Australian standards (e.g., AS/NZS 3000 wiring rules), and accessibility can also impact installation pricing.
While we don’t list fixed prices online because every home is different, we promise we don’t compete to be the cheapest, we compete to be the best. Cheap installs often mean cut corners, dangerous electrical work, and voided warranties. Poor-quality installations may also lead to refrigerant leaks, inefficient operation, higher energy bills, and reduced system lifespan.
Our Promise: We provide a transparent, fixed-price quote with no hidden costs. Plus, we factor in government rebates to ensure you get the lowest possible net price. These may include energy efficiency incentives, such as rebates tied to high Energy Star ratings or state-based programs promoting reverse cycle air conditioners as sustainable heating and cooling solutions.
Expert Advice: Finding the Perfect Split System Size for Your Home
Selecting the right air conditioner is about precise calculation, not guesswork. Installing a unit with the wrong kilowatt (kW) output is the most common mistake homeowners make, leading to higher electricity bills and poor performance.
- Thermal Load Calculation: We measure your room dimensions, ceiling height, insulation quality, and window direction (aspect) to determine exactly how much cooling power you need. This process may also incorporate industry-standard methodologies like Manual J calculations and considers solar heat gain, air infiltration rates, and building materials to fine-tune the required capacity.
- Electrical Capacity: As licensed electricians, we check your existing switchboard to ensure it can safely handle the new load. This includes evaluating circuit breakers, load balancing, and compliance with AS/NZS 3000 wiring standards to prevent overloads and ensure safe operation of your split system.
- Perfect Fit Guarantee: We ensure you avoid undersized units that run constantly and cost a fortune, as well as oversized units that “short-cycle” and fail to dehumidify the room. Short cycling not only reduces indoor air quality (IAQ) and humidity control but also increases wear on the compressor, leading to higher maintenance costs and reduced system lifespan. We also consider inverter technology, which helps modulate output and maintain consistent temperatures efficiently. We recommend the system that fits your home and budget perfectly.
| Room Type | Approx. Size | Recommended Capacity |
| Bedroom | Up to 20m2 | 2.5kW |
| Master bedroom | 20-30m2 | 3.5kW |
| Small lounge or open kitchen | 30-40m2 | 5.0kW |
| Large open-plan living/dining | 40-60m2 | 6-7kW |
| Very large open plan | 60m2+ | 8kW+ |
Premium Air Conditioning & Electrical Services in Newcastle
From energy-efficient residential upgrades to complex commercial installations, we deliver complete climate control solutions across Newcastle and the Hunter. We don’t just install air conditioners, we design systems that lower your running costs, maximise your comfort, and protect your investment for years to come.
Ducted Air Conditioning
Experience seamless, whole-home comfort with our ducted air conditioners. We design high-end ducted solutions (including Actron Air and Mitsubishi Electric) tailored to your family’s lifestyle and zoning needs.
Split System Air Conditioning
Perfect for single rooms or specific zones, our split system air conditioner installations prioritise energy efficiency and aesthetics. We supply and install whisper-quiet units that actually handle the Newcastle summer.
Multi Split Air Conditioning
Achieve “hotel-style” climate control in your home. We install sophisticated multi split ac systems that allow individual temperature settings for different rooms, running off a single outdoor compressor.
Air Conditioning Service
You wouldn’t drive a new car without servicing it, so don’t neglect your climate control investment. We provide comprehensive air conditioning services, maintenance and repairs to ensure your air con doesn’t let you down.
Commercial AC Service
We minimise business disruption with robust heating and cooling solutions for offices, retail, and aged facilities. Whether you need a complex VRF system for a hotel or maintenance on large 25kW+ commercial units, we ensure you meet regulatory compliance and keep your occupants comfortable with our commercial air conditioners.
Electrical Services
As fully licensed electricians, we handle the complete power requirements for your climate control systems. We offer premium electrical work for clients who value safety and professional execution over cutting corners. We are licensed to carry out any electrical task you may have.
Schedule a free consultation with one of our specialists today.
Common Questions: Split System Installation, Costs & Repairs
How long does a split system installation take?
A standard back-to-back installation typically takes 3 to 4 hours. We work efficiently to minimise disruption to your day.
What is a “back-to-back” installation?
This is the most economical install type, where the indoor unit is mounted on the inside of an external wall, and the outdoor unit is placed directly behind it on the ground or a bracket. This minimizes pipe and cable runs.
How often should I service my air conditioner?
To keep your warranty valid and your air clean, we recommend a routine service and filter clean every 12 months. For landlords or high-usage homes, a Hydro Clean every 6 months is recommended to remove mould and bacteria.
Can you install the electrical circuit for the aircon?
Perry is a fully licensed electrician, we can install the required safety switches and circuits ourselves. You don’t need to hire a second tradesman.
What warranty do you offer on the installation?
We go far beyond the industry standard. While most Newcastle installers only cover their workmanship for the required 12 months, we provide a massive 5-Year Labour and Materials Warranty. This runs alongside your manufacturer’s warranty, meaning you are completely covered for the long haul because we trust the quality of our dual-trade workmanship.
Which is cheaper to run, a ducted or split system?
A split system is usually cheaper to run than a ducted system, especially for homes that only need cooling in one or two rooms. Split systems use less electricity because you only operate the units you need, while ducted systems typically run across the whole home and consume more power. In Australia, a ducted system can cost 2–3 times more per hour to run compared to a single split system, although zoning can improve efficiency.
Do I need an electrician to install a split system?
Yes, a licensed electrician is typically required to install a split system in New South Wales. The system must be safely connected to your home’s electrical supply, comply with Australian standards, and often requires isolation switches and circuit protection. Many air conditioning installers are dual-licensed technicians who handle both refrigeration and electrical work, so you don’t need to hire multiple trades.
Does a split system need its own circuit?
In most cases, yes. A split system air conditioner should be installed on a dedicated electrical circuit to handle its power load safely and prevent overloading existing circuits. This also ensures compliance with Australian electrical standards and helps protect the system, your home, and your warranty.
What type of aircon is best for homes?
The best air conditioning system depends on your home size and usage. For most Australian homes, split systems are the best option for efficiency, affordability, and targeted cooling in individual rooms or smaller spaces. Ducted systems are better suited to larger homes where you want whole-house climate control and a cleaner, hidden finish, but they come with higher upfront and running costs. In short, choose a split system for cost-effective, flexible cooling, and ducted if you want full-home comfort and long-term value.
What brands do you install?
We install and supply Daikin, Mitsubishi Electric, Mitsubishi Heavy Industries, and Fujitsu. We work with these brands because their quality control and parts availability hold up well in the Newcastle and Hunter climate, particularly for homes near salt air. We won’t install a brand we wouldn’t put in our own house.
My unit is blowing warm air. Can you fix it without replacing it?
Usually, yes. Warm air is most commonly caused by a refrigerant leak, a dirty filter, or a faulty reversing valve, all repairable. Perry carries diagnostic tools for both the electrical and mechanical side of the system, which means faults get identified in one visit rather than two. We service all major brands, not just the ones we install.
Covering these areas and more
- New Lambton
- New Lambton Heights
- Lambton
- Hamilton
- Broadmeadow
- Mayfield
- Jesmond
- Waratah
- Cooks Hill
- The Junction
- Merewether
- Bar Beach
- Newcastle East
- Newcastle West
- Charlestown
- Kotara
- Glendale
- Cameron Park
- Elemore Vale
- Edgeworth
- Cardiff
- Warners Bay
- Boolaroo
- Speers Point
- Morisset
- Booragul
- Maitland
- East Maitland
- Rutherford
- Thornton
- Beresfield
- Metford
- Telarah
- Raymond Terrace
- Cessnock
- Kurri Kurri
- Singleton
- Raymond Terrace
- Medowie
- Taylors Beach
- Williamtown
- Heatherbrae